CleanVent Air and Dirt Separator (CVAD)

Cleanvent
The Air Free & Clean Solution.
An air & dirt free water system through one unit.

Problems arising with air & dirt in water systems.

Deaeration

The word Deaeration describes the removal of dissolved gases from liquids such as air from water. When water is heated or the pressure reduced gas microbubbles are released into the system. Microbubbles can be the cause of major of problems such as pump failure, corrosion and energy loss.

The Solution

The Cleanvent combines the removal of air and dirt through a single unit. Installed at the hottest point in the system the Cleanvent will eliminate these microbubbles from heating and chilled water systems.

Dirt Removal

The Cleanvent is also used to remove dirt particles from heating and chilled water systems. Installed it will eliminate all dirt particles down to 10 microns.

Features

• Greatly reduced commissioning times after initial fill.
• Longer system life (through air and dirt elimination)
• Low-pressure drop
• Bi-directional flow
• Max.temp. 110 c
• Max. Working pressure 10 bar
• Tested to 21 bar
• Standard carbon steel shell (stainless on request)
• Air collects in the air chamber before being automatically vented
• Floating dirt can be removed by opening the valve situated on the side of the unit.
• The same valve is used for releasing air when filling the system
• Large collector ensures that flushing is only required periodically
• Can be flushed while fully operational (no need to shut down)
• An internal stainless steel concentrator to aid removal of air and dirt.

Contact Fabricated Products

Please enquire about our CleanVent range of air & dirt separators.  A clean and efficient way for longer lasting less problematic water systems.

• News
• credit request
• terms & conditions
• contact us
• Site Map
• Info

Quality products from the only UK manufacturer of air and dirt separation equipment.