The Coalescence of Microbubbles In heating & chilled water systems

Fabricated Products (UK) Separators remove dirt, air, & microbubbles in heating systems up to 60 metres head of water above the unit.

The explanation for this is simple; our unique filter allows no direct passage of water straight through the unit. Due to the multitude of fine wires, it is impossible for the flow water to pass directly through. Therefore, all microbubbles eventually come into contact with the filter and the coalescence process takes place.

The explanation for this is simple; our unique filter allows no direct passage of water straight through the unit. Due to the multitude of fine wires, it is impossible for the flow water to pass directly through. Therefore, all microbubbles eventually come into contact with the filter and the coalescence process takes place.

In the event of increasing head of water the microbubbles do decrease in size. Nevertheless just because the microbubbles are getting smaller this does not mean the microbubbles cannot be removed in this range of water. The explanation, because the microbubbles collide together to make one larger bubble then rise to be vented. However, above 60 metres the efficiency of the unit is reduced.

The principle above is the same for chilled water systems except the 40 metre head of water applies.

Our Separators have been tested & they can remove microbubbles down to 20 microns (0.02mm) in size at six bars with a water temperature of 10 degrees centigrade.

Air and Dirt Separators Clients 1
Air and Dirt Separators Clients 2
Air and Dirt Separators Clients 3
Air and Dirt Separators Clients 4
Air and Dirt Separators Clients 5
Air and Dirt Separators Clients 6
Air and Dirt Separators Clients 7
Air and Dirt Separators Clients 8